Wearer’s Guide

Cleaning and Disinfecting Monthly and 2-weekly Contact Lenses

Cleaning and disinfecting with Biotrue Multi-Purpose Solution

biotrue multipurpose solution

Biotrue® Multi-Purpose Solution helps keep lenses continuously moist for up to 20 hours.

To condition, clean, remove protein and disinfect lenses, complete these simple steps. This daily regimen is recommended by Bausch + Lomb for a healthy and comfortable contact lens wearing experience:

1 Place at least 3 drops of Biotrue® multi-purpose solution on each side of lens surface and gently rub for 20 seconds.

2 Thoroughly rinse each side of the lens for 5 seconds with Biotrue® multi-Purpose solution.

3 Place cleaned contact lenses in the lens case and fill with fresh Biotrue® multi-purpose solution. Soak for at least 4 hours. Remember to always use fresh solution, discard solution – discard solution from lens case after each use.

Your lenses are now ready to wear. If any debris remains on contact lenses, rinse with Biotrue® multi-purpose solution prior to insertion. Always follow your eye care professionals instructions. Based upon your individual tear chemistry and lens-wearing schedule, your eye care professional may recommend additional products or procedures. If not wearing contact lenses immediately, store them in a closed lens case. Do not store your lenses in simple saline in place of Biotrue® multi-purpose solution. Saline solution will not disinfect. Lenses may be stored in the unopened case until ready to wear, up to a maximum of 30 days. If you store lenses for longer periods of time, they must be cleaned and disinfected with fresh Biotrue® multi-purpose solution prior to lens insertion.